EXPORT PACKING

Steel Export Packing for Plates, Coils and Long Products

Export packing is planned around the steel being shipped: its dimensions, bundle weight, surface condition and handling requirements. Bao Steel (Qingdao) prepares steel orders from its own manufacturing and supply operations for international shipment, with packing arrangements confirmed against the purchase order and transport route.

Material-specific packingBundle identificationPre-shipment checks
Stable SupportSkids, saddles and packing bases selected for the load
Surface ProtectionSeparation and covering suited to the material finish
Secure LoadsStrapping, blocking and restraint for handling and transport
Order VerificationBundle counts, material identification and packing records
PACKING FOR THE MATERIAL

Packing starts with the steel specification

A heavy plate stack, a hot rolled coil and a bundle of structural beams need different support and restraint. Before packing, we review the product form, ordered dimensions, bundle or coil weight, surface condition and discharge requirements.

The packing schedule is coordinated with stock and supply, material identification and any requested quality inspection. For cut or slit material, packing quantities are checked against the agreed processing specification.

PRODUCT PACKING

Packing methods for different steel products

The final configuration depends on product size and weight, loading equipment, shipment method and the protection agreed with the buyer.

01 · FLAT PLATE

Steel Plate & Sheet

Plates are grouped by specification and supported to distribute their weight. Stacks can be aligned, separated where necessary and secured with appropriate strapping, edge protection and timber or steel supports. Heavy plates are handled according to stack weight and lifting requirements.

02 · STEEL COIL

Hot Rolled & Cold Rolled Coil

Coils are secured against rolling using suitable saddles or cradles and handling restraints. Protective wrapping, edge guards and moisture barriers are selected according to surface condition. Coil eye orientation and securing are confirmed against the loading plan.

03 · PROTECTED FINISH

Coated & Stainless Steel

Galvanized, prepainted and stainless products require additional attention to abrasion, moisture and contact marks. Protective sheets, edge guards and clean separation materials are selected for the specified finish. Painted and stainless surfaces are protected against direct contact with unsuitable packing materials.

04 · TUBULAR PRODUCTS

Steel Pipe & Tube

Pipes and hollow sections are grouped by diameter, wall thickness and length. Bundles are restrained against movement and supported along their length. End caps or additional end protection can be specified where required by the pipe finish or order.

05 · LONG LENGTHS

Beams, Bars & Rebar

Bars, beams, channels and reinforcing steel are bundled by section, grade and length. Steel bands are distributed along long bundles, with multiple supports to limit bending, rolling and handling damage. Large or irregular sections may require a separate lifting and loading arrangement.

06 · COILED LONG PRODUCTS

Wire Rod & Steel Wire

Wire rod coils are bound at suitable positions to retain their shape during lifting and transport. Drawn wire can be shipped in coils, spools or drums according to the order. Protection and package size are reviewed with wire diameter, coil weight and surface condition.

CONTAINER & CARGO SECURING

Loading plans account for weight and movement

Container stuffing and transport restraints are considered before loading. Bundle weight, load concentration and movement during road and sea transport determine how the cargo is supported, blocked and secured.

Load DistributionCheck the cargo weight, floor loading and available payload against the selected transport unit.
Stable FoundationsUse correctly placed saddles, skids or dunnage to support the steel and reduce point loading.
Blocking & RestraintLimit longitudinal and lateral movement with suitable blocking, bracing or lashings.
Destination RequirementsConfirm applicable ISPM 15 treatment and marking requirements where solid-wood packaging is used.
PACKING INSPECTION

Protection and records checked before dispatch

Packing is checked against the order and loading arrangement. Product identification and package counts must remain consistent with the accompanying documents.

Material identificationGrade, dimensions, heat or batch reference where applicable
Package detailsBundle or coil count, piece quantities and net/gross weights
Surface conditionWrapping, separation, edge protection and moisture precautions
Shipment documentsPacking list and agreed material test or inspection records
Loading confirmationPackage arrangement and shipment photographs when requested
ORDER TO DISPATCH

Four checks before the shipment leaves

Packing requirements are reviewed with the material order, then checked again when the cargo is prepared for collection or loading.

01

Confirm the Order

Check grade, size, quantity, surface condition, destination and requested package form.

02

Prepare the Packing

Select supports, strapping, edge protection and package grouping to suit the material.

03

Verify Packages

Check quantities, identification, restraint, protection and packing list details.

04

Release for Loading

Review the shipment arrangement, cargo handling requirements and agreed documents.

Have a packing specification?

Send the material list, package limits, loading method or destination requirements with your steel enquiry. We can review packing and shipment preparation together with the quotation.

EXPORT PACKING FAQ

Common questions before shipping steel

Packing can be specified with the initial material enquiry, particularly for coated surfaces, heavy coils and long-length products.

How are heavy steel coils kept from rolling during transport?
Coils require a stable cradle or saddle, suitable restraint and a loading plan that accounts for coil weight and orientation. The final arrangement is selected according to the transport unit and coil specification.
Can steel plates be packed by grade and size?
Yes. Plate orders can be grouped by material grade, dimensions and batch. Stack weight, support positions, strapping and handling requirements are reviewed before packing. See our steel plate supply.
What protection is available for galvanized or prepainted coils?
Protective wrapping, edge guards and separation materials can be specified according to the finish and shipping route. The final packing specification is confirmed with the product order.
Are wood packing materials subject to ISPM 15?
Some destinations require regulated solid-wood packaging or dunnage to be treated and marked in accordance with ISPM 15. Applicable requirements should be confirmed for the destination before packing is finalized.
Can bundle weights and piece counts be specified?
Yes. State the maximum bundle or coil weight, required piece counts and unloading conditions in your purchase specification. We will review the requested package limits alongside the available material sizes.
Which documents accompany an export order?
Packing lists and shipment documents are prepared according to the agreed trade terms. Mill test certificates and third-party inspection records can be included when specified in the order. For transport arrangements, see Shipping & Logistics.
REQUEST A QUOTE

Share your specifications or upload a purchase list. We will review the details and get back to you.


    PDF, Word, Excel, JPG or PNG. Max. 10 MB.

    Your contact information is used to respond to your inquiry. Privacy Policy.

    BAO STEEL (QINGDAO) CO., LTD. Direct factory contact · Qingdao, China
    WhatsApp