SGS Inspection
We coordinate SGS inspection for the tests and checks specified in your purchase order, including material verification, dimensional checks, test witnessing and pre-shipment inspection where agreed.
INSPECTION BY AGREEMENTBao Steel (Qingdao) Co., Ltd. is a steel manufacturer in China. We produce and supply steel from our own mills, with material test certificates matched to the grade, product standard and heat number. For export orders, we coordinate inspection by SGS, Bureau Veritas (BV) and TÜV according to the requirements agreed in the purchase order.
As a steel manufacturer, Bao Steel (Qingdao) Co., Ltd. supplies carbon steel, stainless steel and coated steel products with documentation matched to the applicable product standard and purchase order. We provide MTCs with material identification and the test results required for the supplied grade, and coordinate additional inspection when your project calls for it.
Our ISO 9001-certified quality management system supports order review, production control, material identification, inspection records and corrective action within the certified scope.
Bao Steel (Qingdao) Co., Ltd. holds ISO 9001 certification for the activities listed in our current certificate. We provide the certificate for supplier registration, project prequalification and procurement review. It identifies the certified entity, scope, standard edition, issuing body, certificate reference and validity period.
Our quality records connect customer specifications with production checks, material identification and final inspection. Procurement teams can review these records alongside the MTC and shipping documents.
The required certificate type follows the product standard and purchase order. If your project specifies EN 10204 3.1 or 3.2, include it in the enquiry so we can arrange the inspection scope before production or dispatch.
For each order, Bao Steel (Qingdao) provides the material test certificate applicable to the supplied grade and product standard. The MTC identifies the steel, heat or batch reference and relevant test results. Depending on the product specification, it may include chemical composition, tensile properties, impact results, hardness or other required tests.
| EN 10204 Type | Document | Information | Validation |
|---|---|---|---|
| 2.1 | Declaration of compliance | Manufacturer's declaration that the products comply with the order; no test results are included. | Manufacturer |
| 2.2 | Test report | Statement of compliance with results from non-specific inspection. | Manufacturer |
| 3.1 | Inspection certificate 3.1 | Results from specific inspection on the supplied products or inspection unit. | Manufacturer's authorised inspection representative independent of the manufacturing department. |
| 3.2 | Inspection certificate 3.2 | Results from specific inspection on the supplied products or inspection unit. | Manufacturer's authorised inspection representative and the purchaser's authorised representative or an inspector designated by official regulations. |
State the required EN 10204 type and applicable tests in the purchase order. For Type 3.2, the purchaser's representative or designated inspector must be included in the inspection arrangement.
For orders requiring independent verification, Bao Steel (Qingdao) coordinates inspection with SGS, Bureau Veritas (BV), TÜV or the inspection body named in your purchase order.
We confirm the inspection standard, product and heat references, sampling plan, test requirements, witness points, inspection location and reporting format with you and the selected agency.
Inspection can take place at the agreed production, storage or loading stage, according to the order requirements and the selected agency's service scope.
We coordinate SGS inspection for the tests and checks specified in your purchase order, including material verification, dimensional checks, test witnessing and pre-shipment inspection where agreed.
INSPECTION BY AGREEMENTWe coordinate Bureau Veritas inspection against the purchase specification, agreed witness points and shipment schedule.
INSPECTION BY AGREEMENTWe coordinate TÜV inspection for projects that name TÜV as the inspection body, with the scope and schedule agreed before inspection.
INSPECTION BY AGREEMENTFor products covered by applicable EU harmonised legislation, Bao Steel (Qingdao) provides the relevant product conformity documents for the specific product and intended use. Depending on the applicable route, this may include a Declaration of Performance or Declaration of Conformity and supporting technical documentation.
We review the product standard, intended use and destination market against your purchase requirements before confirming the document set.
Our MTC and inspection records follow the material standard, product form and tests stated in your purchase order. Requirements differ between plate, coil, coated steel, pipe, bars, rebar and wire.
For carbon steel plate, the MTC identifies heat analysis and mechanical properties. Project requirements may also include impact testing, dimensional checks, surface inspection or ultrasonic testing.
For coil orders, we record grade and heat references and check thickness, width, coil identification and specified mechanical properties.
Carbon SteelStainless steel documentation covers chemical composition, mechanical properties, dimensions and surface finish. Additional tests, such as intergranular corrosion testing, are included when required by the grade or purchase specification.
Stainless SteelFor galvanized, galvalume and pre-painted steel, inspection can cover base steel grade, coating designation, coating mass or thickness, paint coating thickness and surface condition as specified.
Coated SteelPipe inspection follows the applicable product standard and may include chemical and mechanical tests, dimensional checks, hydrostatic testing, weld examination and NDT.
Records for bars and sections can cover grade, heat reference, tensile properties, section dimensions, straightness and impact tests where required by the specification.
Structural SteelFor rebar and wire rod, inspection may include tensile properties, bend or rebend tests, mass per metre, rib geometry and coil or bundle identification according to the applicable standard.
Rebar & Wire RodWire records can include grade, diameter, tensile strength, coating or surface condition, coil weight and batch identification.
Steel WireWe link the material identification on the steel and its packaging with the relevant MTC, inspection records and packing list.
Bao Steel (Qingdao) records the heat or cast number, coil or bundle reference and supplied quantity against the order. When material is cut, repacked or split into partial deliveries, we retain the applicable references on the related packages and delivery records.
Confirm the certificate type and inspection scope with your steel specification before production or dispatch.
Send the grade, product standard, dimensions, delivery condition and quantity.
Specify the MTC type, document language and required test records.
Confirm tests, sampling, witness points and the nominated inspection body.
Complete the agreed checks and review results against the purchase specification.
Match the MTC and inspection records to the steel prepared for dispatch.
Send your material standard and inspection requirements with the RFQ so we can confirm the documents for your order.
Share your specifications or upload a purchase list. We will review the details and get back to you.
Your contact information is used to respond to your inquiry. Privacy Policy.
Share your specifications or upload a purchase list. We will review the details and get back to you.
Your contact information is used to respond to your inquiry. Privacy Policy.