STEEL CERTIFICATES & INSPECTION

Steel Certifications, MTC & Inspection

Bao Steel (Qingdao) Co., Ltd. is a steel manufacturer in China. We produce and supply steel from our own mills, with material test certificates matched to the grade, product standard and heat number. For export orders, we coordinate inspection by SGS, Bureau Veritas (BV) and TÜV according to the requirements agreed in the purchase order.

MTCs for supplied steel EN 10204 3.1 / 3.2 by order SGS · BV · TÜV inspection
ISO 9001Certified quality management system
MTC / EN 10204Material test and inspection documents
SGS · BV · TÜVThird-party inspection coordinated by agreement
Heat & Batch TraceabilityMaterial references linked to MTC and packing records
STEEL DOCUMENTATION FROM OUR MILLS

Steel quality documents matched to your order

As a steel manufacturer, Bao Steel (Qingdao) Co., Ltd. supplies carbon steel, stainless steel and coated steel products with documentation matched to the applicable product standard and purchase order. We provide MTCs with material identification and the test results required for the supplied grade, and coordinate additional inspection when your project calls for it.

  • Grade, product standard, dimensions and delivery condition shown on the MTC
  • Heat or batch numbers linked to the supplied material
  • Chemical analysis and mechanical test results required by the standard
  • Dimensional, surface, coating and NDT records where specified
  • SGS, BV, TÜV or buyer-nominated inspection arranged to the agreed scope
QUALITY MANAGEMENT AT BAO STEEL

ISO 9001 quality management at Bao Steel (Qingdao)

Our ISO 9001-certified quality management system supports order review, production control, material identification, inspection records and corrective action within the certified scope.

Quality procedures across our steel operations

Bao Steel (Qingdao) Co., Ltd. holds ISO 9001 certification for the activities listed in our current certificate. We provide the certificate for supplier registration, project prequalification and procurement review. It identifies the certified entity, scope, standard edition, issuing body, certificate reference and validity period.

Our quality records connect customer specifications with production checks, material identification and final inspection. Procurement teams can review these records alongside the MTC and shipping documents.

Supplier qualification: Request the current Bao Steel (Qingdao) Co., Ltd. ISO 9001 certificate for vendor registration and project prequalification.
MILL TEST CERTIFICATES

MTCs and EN 10204 inspection certificates

The required certificate type follows the product standard and purchase order. If your project specifies EN 10204 3.1 or 3.2, include it in the enquiry so we can arrange the inspection scope before production or dispatch.

MTCs for steel supplied by our mills

For each order, Bao Steel (Qingdao) provides the material test certificate applicable to the supplied grade and product standard. The MTC identifies the steel, heat or batch reference and relevant test results. Depending on the product specification, it may include chemical composition, tensile properties, impact results, hardness or other required tests.

  • Steel grade, product standard and dimensions
  • Heat or cast number and supplied quantity
  • Chemical analysis and mechanical properties
  • Delivery condition and specified additional test results
  • MTC type and validation details
EN 10204 TypeDocumentInformationValidation
2.1Declaration of complianceManufacturer's declaration that the products comply with the order; no test results are included.Manufacturer
2.2Test reportStatement of compliance with results from non-specific inspection.Manufacturer
3.1Inspection certificate 3.1Results from specific inspection on the supplied products or inspection unit.Manufacturer's authorised inspection representative independent of the manufacturing department.
3.2Inspection certificate 3.2Results from specific inspection on the supplied products or inspection unit.Manufacturer's authorised inspection representative and the purchaser's authorised representative or an inspector designated by official regulations.

State the required EN 10204 type and applicable tests in the purchase order. For Type 3.2, the purchaser's representative or designated inspector must be included in the inspection arrangement.

THIRD-PARTY INSPECTION

Independent inspection by SGS, BV and TÜV

For orders requiring independent verification, Bao Steel (Qingdao) coordinates inspection with SGS, Bureau Veritas (BV), TÜV or the inspection body named in your purchase order.

Inspection scope agreed before the order is released

We confirm the inspection standard, product and heat references, sampling plan, test requirements, witness points, inspection location and reporting format with you and the selected agency.

Inspection can take place at the agreed production, storage or loading stage, according to the order requirements and the selected agency's service scope.

  • Material and heat-number verification
  • Visual and dimensional inspection against the order
  • Chemical and mechanical test witnessing
  • Coating, surface and NDT checks where specified
  • Quantity, packing and loading inspection before dispatch

SGS Inspection

We coordinate SGS inspection for the tests and checks specified in your purchase order, including material verification, dimensional checks, test witnessing and pre-shipment inspection where agreed.

INSPECTION BY AGREEMENT

Bureau Veritas (BV)

We coordinate Bureau Veritas inspection against the purchase specification, agreed witness points and shipment schedule.

INSPECTION BY AGREEMENT

TÜV Inspection

We coordinate TÜV inspection for projects that name TÜV as the inspection body, with the scope and schedule agreed before inspection.

INSPECTION BY AGREEMENT
PRODUCT CONFORMITY

CE documentation for applicable steel products

For products covered by applicable EU harmonised legislation, Bao Steel (Qingdao) provides the relevant product conformity documents for the specific product and intended use. Depending on the applicable route, this may include a Declaration of Performance or Declaration of Conformity and supporting technical documentation.

We review the product standard, intended use and destination market against your purchase requirements before confirming the document set.

CE-related enquiries: Include the product type, intended use, destination country and required declaration in your RFQ.
DOCUMENTATION BY PRODUCT

Inspection records for the steel you order

Our MTC and inspection records follow the material standard, product form and tests stated in your purchase order. Requirements differ between plate, coil, coated steel, pipe, bars, rebar and wire.

Rebar & Wire Rod

For rebar and wire rod, inspection may include tensile properties, bend or rebend tests, mass per metre, rib geometry and coil or bundle identification according to the applicable standard.

Rebar & Wire Rod
TRACEABILITY & DOCUMENT CONTROL

Heat and batch traceability from mill to shipment

We link the material identification on the steel and its packaging with the relevant MTC, inspection records and packing list.

Material identification kept with the order records

Bao Steel (Qingdao) records the heat or cast number, coil or bundle reference and supplied quantity against the order. When material is cut, repacked or split into partial deliveries, we retain the applicable references on the related packages and delivery records.

  • Heat or cast number recorded on the MTC and material records
  • Bundle, coil or piece identification retained during handling
  • Split quantities linked to the original heat or batch
  • MTC and inspection records checked against the packing list
INSPECTION ARRANGEMENT

Confirm certificates and inspection before ordering

Confirm the certificate type and inspection scope with your steel specification before production or dispatch.

STEP 01

Confirm the Steel Specification

Send the grade, product standard, dimensions, delivery condition and quantity.

STEP 02

Select the Certificate

Specify the MTC type, document language and required test records.

STEP 03

Agree Inspection Scope

Confirm tests, sampling, witness points and the nominated inspection body.

STEP 04

Complete Inspection

Complete the agreed checks and review results against the purchase specification.

STEP 05

Match the Documents

Match the MTC and inspection records to the steel prepared for dispatch.

For a quotation: Send us the steel grade, product standard, quantity, required EN 10204 type, additional tests and nominated inspection agency. Attach the project specification or inspection plan if available.
CERTIFICATION & INSPECTION FAQ

Steel certificate and inspection questions

Send your material standard and inspection requirements with the RFQ so we can confirm the documents for your order.

Can Bao Steel (Qingdao) provide an MTC for my order?
Yes. Bao Steel (Qingdao) provides MTCs for supplied steel in line with the applicable product standard and agreed order requirements. Each certificate identifies the material and its heat or batch reference, with the test results required for the product.
What is the difference between EN 10204 3.1 and 3.2?
A 3.1 certificate is validated by the manufacturer's authorised inspection representative who is independent of the manufacturing department. A 3.2 certificate also requires validation by the purchaser's authorised representative or an inspector designated by official regulations. We agree the external inspection arrangement before the inspection takes place.
Can SGS, BV or TÜV inspect the steel before shipment?
Yes. We coordinate inspection with SGS, BV, TÜV or your nominated agency. The inspection scope, sampling, witness points, location and schedule are confirmed against your purchase order.
Can you provide CE-related documents for steel products?
CE documentation is product-specific. Where applicable EU harmonised legislation covers the product, we review the conformity route and provide the required documents for its intended use. Include the destination country and application in your RFQ.
Can you provide chemical and mechanical test results?
Yes. We provide the chemical and mechanical test results required by the product standard and agreed purchase order. List any additional impact, hardness, bend, hydrostatic or NDT requirements in your RFQ.
Can MTCs be matched to split deliveries?
Yes. We keep heat or batch references linked to the MTC and delivery records. For cut, repacked or split lots, material identification and quantities are recorded against the corresponding packages and delivery documents.
REQUEST A QUOTE

Share your specifications or upload a purchase list. We will review the details and get back to you.


    PDF, Word, Excel, JPG or PNG. Max. 10 MB.

    Your contact information is used to respond to your inquiry. Privacy Policy.

    BAO STEEL (QINGDAO) CO., LTD. Direct factory contact · Qingdao, China
    WhatsApp