Review the order
Confirm grade, standard edition, size range, tolerances, delivery state and requested documents.
Material Quality & Traceability
Bao Steel (Qingdao) checks material identity, dimensions, test results and delivery condition against the agreed purchase specification. Our quality control covers steel plate, coil, rebar, wire, bars, structural sections and pipe produced at our mills.
Order-Based Acceptance
Acceptance criteria differ by steel grade, product form, thickness and service requirement. The applicable ASTM, EN, JIS, GB or other contract standard defines what must be checked and how results are reported.
Confirm grade, standard edition, size range, tolerances, delivery state and requested documents.
Link production or stock material with its heat, test unit, grade and supply records.
Carry out applicable composition, mechanical, dimensional, coating or non-destructive tests.
Review results, material identity, packing requirements and the inspection documents.
Laboratory Testing
The ordered steel specification determines sampling, test units, methods and acceptance limits. Results are recorded against the corresponding heat, batch or test unit.
Chemical Composition
Heat or product analysis is checked as required by the material standard. Carbon, manganese, silicon, phosphorus and sulfur are important for many carbon steels; stainless and alloy grades also require attention to elements such as chromium, nickel and molybdenum.
Mechanical Properties
Tensile tests provide yield or proof strength, tensile strength and elongation where required. Bend, rebend, hardness and impact tests are selected for the product and its service conditions, rather than applied uniformly to every order.
Product-Specific Inspection
Vessel plate, galvanized coil and reinforcing bar each have their own inspection requirements. Acceptance follows the product standard and the agreed order terms.
Thickness, width, length, flatness and surface condition. Impact tests, heat-treatment records and plate ultrasonic testing are included when specified for the grade or application.
Thickness, width, edge quality, surface finish, coil condition and applicable mechanical performance are checked against the specified grade and delivery state.
Metallic coating mass or thickness, paint film, finish and surface appearance are assessed by the method required in the order. Coating adhesion or bend performance is tested where relevant.
Nominal diameter, mass per metre, rib geometry and tensile properties are considered together. Bend or rebend requirements follow the applicable BS 4449, ASTM or GB standard.
Diameter, surface condition, coil integrity and tensile performance are checked for the ordered product. Zinc coating inspection applies to galvanized wire where specified.
Diameter or section, straightness, surface finish and mechanical properties are reviewed by grade and supply condition. Hardness and ultrasonic testing can apply to specified bar orders.
Web, flange and section geometry, straightness and cut length are checked for the ordered profile. The relevant section tolerance standard determines acceptance.
Outside diameter, wall thickness, straightness, ends and surface condition are examined. Weld inspection, hydrostatic testing or other NDT is included when required by the pipe specification.
Dimensional & Special Inspection
Inspection techniques are chosen for the product and acceptance criteria. Surface readings, dimensional checks and internal-condition testing address different acceptance requirements.
Ultrasonic examination can be specified for internal discontinuities in plate. The applicable test method, inspection level and acceptance criteria are agreed before testing.
Galvanized and coated products are examined for coating coverage, surface condition and the test results required by their specifications. Coating mass and coating thickness are reported using the appropriate methods and units.
Mill Test Certificates
A Mill Test Certificate links the stated grade, heat or batch identification and reported results to the supplied steel. Document requirements are confirmed at order review so that the appropriate records are available at release.
EN 10204 Type 3.1 is validated by the manufacturer's authorized representative independent of production. Type 3.2 includes the required additional validation by the purchaser's representative or an inspector designated by regulation. Type 3.2 must be arranged before the applicable inspection takes place.
Independent Inspection & Release
SGS, Bureau Veritas (BV) and TÜV inspection can be arranged according to project requirements and the agreed scope. Sampling, test witnessing, dimensional checks or pre-shipment review are planned with the appointed inspection body before the relevant activity.
Procurement Questions
Inspection documents and test requirements should appear in the purchase specification, especially for critical grades and third-party witness points.
Mill Test Certificates can be supplied with the order documentation. Please specify the required certificate type and material standard when requesting a quotation.
Both report results from specific inspection. Type 3.1 is validated by the manufacturer's authorized inspection representative, independent of production. Type 3.2 requires additional validation by the purchaser's representative or an inspector designated by regulation.
Independent inspection can be arranged subject to the agreed scope and the inspecting body's availability. Any witness or hold point should be specified before testing or dispatch.
Each order follows the tests required by its product standard, material grade and purchase agreement. Rebar bend testing, plate ultrasonic testing and coil coating inspection address different material requirements.
For Your Purchase Order
Send the standard, grade, size, quantity and destination along with any impact-test, NDT, coating, MTC or third-party inspection requirements. We will review the details against the proposed supply.
Share your specifications or upload a purchase list. We will review the details and get back to you.
Your contact information is used to respond to your inquiry. Privacy Policy.
Share your specifications or upload a purchase list. We will review the details and get back to you.
Your contact information is used to respond to your inquiry. Privacy Policy.